8
other convenient Features
More or Less tIMe
adjustMeNt
Should you discover that you like any of the
Sensor, Sensor Cook, Defrost, Auto Broil, Auto
roast or Auto Bake settings slightly more done,
touch the
Power LeveL
pad once after touching
your choice of pads.
Should you discover that you like any of the
Sensor, Sensor Cook, Defrost, Auto Broil, Auto
roast or Auto Bake settings slightly less done,
touch the
Power LeveL
pad twice after touching
your choice of pads.
touch oN
touch oN
allows you to cook at 100% power
by touching the
start/touch oN
pad con-
tinuously.
touch oN
is ideal for melting cheese,
bringing milk to just below boiling etc.
The maximum cooking time is 3 minutes.
• Suppose you want to melt cheese on a piece
of toast.
Procedure
Continuously touch the
start/
touch oN
pad. The cooking
time will begin counting up.
START
TOUCH ON
when the cheese is melted to desired degree,
remove finger from
start/touch oN
pad.
Convection microwave Oven stops immediately.
Note:
1. note time it takes for frequently used foods and
program that time in the future.
2. To use
touch oN
, touch pad within 1 minute
after cooking, opening and closing the door or
touching the
stoP/cLear
pad.
3.
touch oN
can only be used 3 times in a row.
If more times are needed, open and close door
or touch
stoP/cLear
.
MuLtIPLe seQueNce
cookINg
The oven can be programmed for up to 4 automatic
cooking sequences for the microwave mode and
2 automatic cooking sequences with preheat for
convection/mix mode, switching from one power
level setting to another automatically.
Sometimes cooking directions tell you to start on
one power level and then change to a different
power level. your oven can do this automatically.
• Suppose you want to cook roast beef for 5
minutes at 100% and then continue to cook for
30 minutes at 50%.
Procedure
1
. First touch
Power
LeveL
once for 100%
power. Then enter
cooking time.
P
O w e R
L
e v e L
0
0
5
. Touch
Power LeveL
pad. Touch number pad
5 for 50% power.
Then enter second
cooking time.
P
O w e R
L
e v e L
5
3
0
0
0
3
. Touch
start/
touch oN
.
START
TOUCH ON
Note:
1. If
Power LeveL
is touched once,
hIgh
will
be displayed.
2. If you wish to know power level, simply touch
Power LeveL
. As long as your finger is
touching
Power LeveL
, the power level will
be displayed.