4
Use the screws supplied to secure the
rear brackets (B) on both the washer
and the pedestal.
Where included, you can insert the
additional container (F).
Connect the appliance as indicated
in the instructions supplied with the
appliance.
10.
13.
14.
Put the pedestal and appliance in
vertical position. If necessary, adjust
the appliance feet and go to step
12. Check that the screws are firmly
screwed.
Move the Pedestal/Appliance
assembly to its permanent location.
Use a spirit level to check if the
assembly is properly leveled. If not
leveled, adjust feet to level properly.
11.
12.
4
8.
For washing machine. Adjust the
appliance adjustable feet at a
suitable height to allow it to slide
under the foot locking brackets.
9.
For washing machine. Lay the
pedestal on the same side and
slide it forward so that the
appliance front feet slides under
foot locking brackets.
11.
For washing machine. Put the
pedestal and appliance in vertical
position. If necessary, adjust the
appliance feet and go to step 16.
Check that the screws are firmly
screwed.
12.
For tumble dryer. Unscrew and
retain the two bottom screws from
the back of the appliance.
10.
For washing machine. Use the
screws supplied to secure the rear
brackets (B) on both the washer
and the pedestal.
13.
For tumble dryer. Screw the rear
brackets (C) on the pedestal by
using the screws supplied in the
stand box.
5
14.
For tumble dryer. Lift the appliance
and slide backwards so that the
appliance front feet slides under
foot locking brackets.
15.
For tumble dryer. Screw the rear
brackets (C) to the back of the
appliance by using the screws
removed in step 12 and adjust the
appliance feet if required.
16.
Move the Pedestal/Appliance
assembly to its permanent
location. Use a spirit level to check
if the assembly is properly leveled.
If not leveled, adjust feet to level
properly.
17.
Where included, you can insert
the additional container (F).
18.
Connect the appliance as indicated
in the instructions supplied with the
appliance.
5
14.
For tumble dryer. Lift the appliance
and slide backwards so that the
appliance front feet slides under
foot locking brackets.
15.
For tumble dryer. Screw the rear
brackets (C) to the back of the
appliance by using the screws
removed in step 12 and adjust the
appliance feet if required.
16.
Move the Pedestal/Appliance
assembly to its permanent
location. Use a spirit level to check
if the assembly is properly leveled.
If not leveled, adjust feet to level
properly.
17.
Where included, you can insert
the additional container (F).
18.
Connect the appliance as indicated
in the instructions supplied with the
appliance.
6
Environmental Concerns
Recycle the materials with the
symbol
. Put the packaging in
applicable containers to recycle it.
Help protect the environment and
human health and to recycle waste
of electrical and electronic
appliances.
Do not dispose appliances marked
with the symbol
with the household
waste.
Return the product to your local
recycling facility or contact your
municipal office.
Summary of Contents for E6WHPED2
