g
22
Operating Instructions
Prior to Using for the First Time
0
Plug the mains plug into the mains
socket.
0
To avoid the build up of unpleasant
odours, the appliance should be placed
near an open window and operated a
few times at the maximum browning
setting
without any bread
.
Switching On (Figure 2)
0
Plug the mains plug into the mains
socket.
0
Insert bread for toasting.
0
Select the browning setting and press
down the start lever.
3
When the required degree of browning
has been reached, the toaster switches
off automatically; the slices of toast
are lifted up ready for removal. By lift-
ing the start lever
(bread lift func-
tion)
the toasted bread can be lifted
sufficiently such that it is easy to
remove
(Figure
3
)
.
Adjusting the Browning Setting
Using the rotary knob you can contin-
uously adjust the browning setting
from 1-6 as required. Setting 1 for
lightest browning. Setting 6 for darkest
browning.
Use a setting between 1 and 3 when
you first start toasting. If the toast is
not browned to your liking, set the
adjuster lower or higher, higher for
example when toasting rye or dark
bread. When toasting only 1 slice and
also when toasting bread that is no
longer fresh, use a slightly lower
browning setting.
3
We would recommend to adjust a set-
ting that the toast is browned to a
„golden yellow“ or „light-brown“
colour. The electronic toasting time
regulator ensures that once a browning
setting has been chosen, the results are
always the same for the same type of
bread.
Stop Button
(Figure 4)
If you want to interrupt toasting, press
the stop button. The appliance
switches off.
Once chosen, the browning setting
remains unchanged.
Defrost Button
(Figure 5)
Also press the defrost button when
toasting frozen bread. This lengthens
the toasting time.
Warm Up Button
(Figure 6)
To warm up toasted bread also press
the warm up button to keep the toast
warm and crisp.
Roll Rack (Figure 7)
1
Due to the nature of the function of
the appliance, the roll rack will become
hot during toasting, therefore never
touch the metal parts.
0
First, make sure the toaster is switched
off.
Hold the roll rack by the hand grips
and put it onto the toasting slot.
0
Place rolls or other bread for crisping
on the rack, turn the browning control
to the required browning setting.
0
Switch on the toaster using the start
lever.
0
When the toaster has switched off,
turn the bread. Repeat the process.
1
Never place rolls or bread directly on
the toasting slot.
0
To remove the roll rack, first allow it to
cool down. Hold the roll rack by the
hand grips and remove it upwards.
822_949_363 EAT4000_Elux.book Seite 22 Mittwoch, 19. Dezember 2007 5:16 17
