Problem
Possible cause
Remedy
The display shows F111.
The plug of the core tem-
perature sensor is not cor-
rectly installed into the
socket.
Put the plug of the core
temperature sensor as far
as possible into the socket.
The display shows an error
code that is not in this ta-
ble.
There is an electrical fault.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, con-
tact the Customer Care
Department.
Steam and condensation
settle on the food and in the
cavity of the oven.
You left the dish in the oven
for too long.
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the cook-
ing process ends.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows
"Demo"
.
The demo mode is activa-
ted.
Refer to "Basic Settings" in
"Daily use" chapter.
12.2
Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is on
the front frame of the appliance cavity. Do
not remove the rating plate from the
appliance cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
13.
INSTALLATION
WARNING!
Refer to Safety chapters.
13.1
Lifting the appliance
To lift the appliance, do not use the door
handle.
www.electrolux.com
22
Summary of Contents for EB4SL80CN
Page 1: ...EB4SL80CN EB4SL80SP EN OVEN USER MANUAL ...
Page 29: ...ENGLISH 29 ...
Page 30: ...www electrolux com 30 ...
Page 31: ...ENGLISH 31 ...
