Electrolux EBB2802K-A, User Manual

5

. USING YOUR REFRIGERATOR

Refrigerators work by transferring heat from the 

food inside to the outside air. This operation 

makes the back and sides of the refrigerator 

feel warm or even hot particularly at start-up 

and on warm days – this is normal.
Avoid placing food against the air vents in the 

refrigerator as it affects efficient circulation. If 

the door is opened frequently, a light frosting 

will occasionally occur on the freezer’s interior. 

This is normal and will clear after a few days. If 

the freezer door is accidentally kept open, a 

heavy frost will coat the inside walls and should 

be removed.
Your new refrigerator uses a high-speed 

compressor, along with other energy-efficient 

components, which may make unusual sounds 

and be more noticeable at night and quieter 

times. These sounds simply indicate your 

refrigerator is working how it should. They 

include:

• Compressor running noises; modern, 

high-efficiency compressors run much 

faster than older models.

• Air movement noise from the small fan 

motor;

• A gurgling sound, similar to water  boiling;

• A popping noise, heard during automatic 

defrosting; and

• A clicking noise, prior to compressor 

start-up. Further details can be found in the 

Troubleshooting Guide.

• Automatic icemaker, while icemaker 

producing ice sounds of ice cubes falling in 

to ice bin pumping and/or water filling may 

be heard.

For bottom mount refrigerators 

(where freezer is below the fresh 

food compartment):

• Ensure all freezer drawer and 

shelves are pushed back 

completely to prevent them from 

keeping the door open.

For top mount refrigerators (where 

the freezer is on top of the fresh food 

compartment).

• Don’t place food forward of the ribs 

on the freezer floor, as it will 

obstruct the door from closing.

5.1

 USING AND REMOVING FEATURES

5.1.1 

TasteSeal 

Room

Use the 

TasteSeal 

compartment to store 

meat, snack, beverage and dairy 

products. You can adjust 

TasteSeal 

temperature by adjusting the refrigerator 

temperature control.

5.1.2 

Metal Tray (Option for ETB3** and 

EBB3** models)

Metal tray locate in 

TasteSeal 

room and 

can lift off from plastic body for cleaning 

follow to instruction in this manual.

Avoid direct contact with food stuff that 

contain high acid or alkali and clean it 

immediately when found any stain.

CAUTION

Do not use in hot cooking or oven 

cooking stoves.

5.1.8 Water Tank

CAUTION

BEFORE REMOVE; to empty the 

water in the tank.

To remove the water tank and 

disassembly cleanable parts follow these 

steps:

1. Press 2 clips on side of water tank to 

unlock water tank from lugs and hold on 

the tank.

2. Pull out the water tank.

3. Rotate tank cover lid up and off from the 

cover.

4. Unclip the both side clips and lift off 

from water tank.

5. Screw the water valve off from tank.

6. Remove nozzle rubber and o-ring from 

water valve.

5.1.3 Glass Shelves

To remove the shelves, gently pull them 

forward until the shelf comes clear of the 

shelf guides. 
To return the shelf, make sure there is 

nothing behind that may obstruct 

movement. Gently push the shelf, into the 

cabinet and back into position.

5.1.4 Deodorizer

Your refrigerator is fitted with Deodorizer 

to assist with the removal of food odours 

inside your refrigerator. Keeping the food 

covered and wrapping it in plastic will also 

help to reduce the odours inside your 

refrigerator.

5.1.5 Crisper Drawer

Crisper drawer is designed for storing 

fruits, vegetables, and other fresh 

produce. Crisper have an auto humidity 

membrane in front of crisper cover to 

maintain optimum humidity for longer fresh 

vegetables.

 - To empty food from the crisper. On 

some models it will be necessary to 

remove the bottle storage bins.

 - Remove the crisper by pulling 

forward, then up and forward again.

 - For top mount models, remove the 

crisper shelf by lifting the catches on 

the left and right underside of the 

shelf and pulling the shelf forward.

Auto humidity membrane automatically 

releases excess moisture and maintains 

optimal humidity for your fresh vegetables, 

maintaining the taste, texture and 

freshness.

To remove the Auto humidity membrane 

part follow these step:

1. Unclip the both side clips and,

2. Lift off from crisper drawer.

It’s not required to replace the Auto 

humidity membrane unless it 

becomes damaged or ruined. If the 

membrane becames soiled or 

dirty, it can be washed with soap 

and water. Ensure membrane is 

dry before putting back in crisper 

drawer. Please contact our service 

provider when need to replace 

your AHC membrane.

5.1.6 Crisper bin

- Storing Vegetables Usethe crisper bin to 

store vegetables, fruits or small items. 

You can adjust the humidity inside the 

bin by sliding the humidity control. Model 

ETB2** and EBB2** have slide control.

5.1.7 Door storage bins 

Both the refrigerator and freezer have 

door  storage bins.
You can adjust the refrigerator bins to 

meet different storage needs. All the door 

bins are completely removable for 

cleaning. If you want to remove or adjust a 

bin, lift and unlock from lugs to remove. 

To replace, lift up and push bin down until 

the support lugs lock it in place.

Rib

TasteSeal 

Room

Reverse the step to assembly the water 

tank and return to its place.

NOTE: Screw in the water valve to water 

tank till stopper touch the rip and the water 

valve nozzle must be point down as 

picture.

CAUTION

LED lighting

Your appliance is fitted with long 

life LED lighting. In the unlikely 

event the LED lights should fail, 

then the LED lights should be 

serviced by the manufacturer. 

Refer to the warranty page for 

contact details.

ENGLISH   25