Electrolux EBE4507, User Manual

CHANGING THE WATER FILTER

  IMPORTANT

•

Always fit the filter as per

manufacturer’s instructions.

•

If you need to replace water tube, only use

approved water quality piping that meets the

pressure requirements.

•

Make sure your refrigerator is level to avoid

uneven ice cubes.

•

Replace filter at suggested intervals to avoid

water/ice reduction and irregularities in taste.

•

Remove and clean ice bin once a month,

discarding unused ice cubes. This will ensure fresh,

clean ice and smooth operation of your ice maker.

•

Clean and empty the dispenser drip tray regularly
to avoid overflow.

  WARNING

If you have not used the dispenser for some time, 

discard the first seven or eight cups of water and any 

ice that the ice maker produces in the first 24 hours 

(contaminants could have settled in the water pipes).

Internal Water filter
The water filter is located at the top left side of the fresh 

food compartment.

Replacing the water filter
You should change the water filter every six months to 

ensure the highest possible water quality.
If  your  refrigerator  has  not  been  used  for  a  period  of 

time  (during  a  house  move  for  example),  change  the 

filter before reinstalling the refrigerator.
It is not necessary to turn the water supply off to 

change the filter. Be ready to wipe up any small 

amounts of water released during the filter 

replacement.

1.

Ensure that the ice maker is turned off (Diagram 1).

2.

Remove the filter by turning anti-clockwise 180˚.

3.

Slide the old water filter cartridge straight out of

the

housing and discard it. (Diagram 2).

4.

Unwrap the new filter cartridge and using the

alignment guide, slide it gently into filter housing

until it stops against the filter connection at the

back

of the housing. (Diagram 3).

5.

Engage the filter by firmly rotating clockwise until

the filter snaps into position (once engaged the

filter

cannot be rotated further). (Diagram 4).

Pu

reS

ou

rce

Ul

tr

a

2

Ice & W

ater Filtration System

Pu

reS

ou

rce

Ul

tr

a

2

Ice & W

ater Filtration System

Pu

reS

ou

rce

Ul

tr

a

2

Ice & W

ater Filtration System

ICE AND WATER MODELS (CONTINUED)

D

Diia

ag

grra

am

m  2

D

Diia

ag

grra

am

m  3

D

Diia

ag

grra

am

m  4

D

Diia

ag

grra

am

m  5

6.

Press a drinking glass against the water dispenser

while checking for any leaks at the filter housing.

Any spurts and sputters that occur as the system

purges air out of the dispenser system are normal.

7.

After filling one glass of water, continue flushing

the

system for about four minutes.

8.

Turn on the ice maker. (Diagram 5).

9.

When the filter has been replaced press and hold

the ‘Ice and Water’ button for three seconds to

reset

the filter replace timer.

D

Diia

ag

grra

am

m 1

14    electrolux.com.au