USING THE ACCESSORIES
WARNING!
Refer to "Safety information" chap-
ter.
CORE TEMPERATURE SENSOR
The core temperature sensor measures the
core temperature of the meat. When the
meat is at the set temperature, the appli-
ance deactivates.
There are two temperatures to set:
• The oven temperature: refer to the table
for roasting in the recipe book.
• The core temperature: refer to the table
for the core temperature sensor in the
recipe book.
Only use the core temperature sen-
sor supplied or the correct replace-
ment parts.
1.
Activate the appliance.
2.
Put the point of the core temperature
sensor (with
on the handle) into
the centre of the meat.
3.
Put the plug of the core temperature
sensor into the socket at the front of
the appliance.
The display shows
flashing and
the default set core temperature. The
temperature is 60 °C for the first oper-
ation, and the last set value for each
subsequent operation.
4.
Touch
or
to set the core tem-
perature.
5.
Touch
or the settings save auto-
matically after 5 seconds.
You can set the core temperature
only when
flashes. If
is in
the display but does not flash be-
fore you set the core temperature,
touch and
or
to set a
new value.
6.
Set the heating function and, if neces-
sary, the oven temperature.
The display shows the current core
temperature and
, which shows the
relation between the set oven tempera-
ture and the current oven temperature.
The core temperature sensor must
stay in the meat and in the socket
during the cooking.
While the appliance calculates the
approximate duration time, the val-
ue of the Count Up Timer function
shows in the Timer / Residual heat
display. When the first calculation
ends, the Timer/Residual heat dis-
play shows
-
and then the approxi-
mate duration of the cooking.
The appliance continues to calcu-
late the duration during the cook-
ing. The display updates at inter-
vals with the new duration value.
7.
When the meat is at the set core tem-
perature, the core temperature and
flash. An acoustic signal sounds
for two minutes.
Touch a sensor field to deactivate the
acoustic signal.
8.
Remove the core temperature sensor
from the socket and remove the meat
from the appliance.
WARNING!
Be careful when you remove the
core temperature sensor. It is hot.
There is a risk of burns.
9.
Deactivate the appliance.
When you put the core tempera-
ture sensor into the socket, you
cancel the settings for the clock
functions.
ENGLISH
17
