WHAT TO DO IF…
WARNING!
Refer to "Safety information" chap-
ter.
Problem
Possible cause
Solution
The appliance does not
heat up.
The appliance is deactiva-
ted.
Activate the appliance.
The appliance does not
heat up.
The time of day is not set.
Set the clock. Refer to
"First setting the time of
day".
The appliance does not
heat up.
The necessary settings are
not set.
Make sure that the set-
tings are correct.
The appliance does not
heat up.
The automatic switch-off
is activated.
Refer to „Automatic
switch-off“.
The appliance does not
heat up.
The fuse is released.
Make sure that the fuse is
the cause for the malfunc-
tion. If the fuse releases
again and again, refer to
an authorized electrician.
The lamp does not oper-
ate.
The lamp is defective.
Replace the lamp.
The display shows an er-
ror code that is not in this
list.
There is an electronic fault. • Deactivate the appli-
ance with the house
fuse or the safety switch
in the fuse box and acti-
vate it again.
• If the display shows the
error code again, refer
to the Service Center.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows “Demo”.
The test mode is activa-
ted.
1.
Deactivate the appli-
ance.
2.
Touch and hold
until the appliance ac-
tivates and deacti-
vates.
3.
Touch and hold
and
at the same
time until an acoustic
signal sounds and
“Demo” goes out.
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the appliance cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
ENGLISH
25