D
E
F
Only a qualified person can con-
nect the appliance to the electricity
supply.
1.
Open the mains terminal cover (
D
).
2.
Put the connection cable into the sup-
plied rings (
E
). This is to prevent the
cable from rubbing against the drawer.
The connection cable is on the housing
side.
3.
Install the cable grip (
F
).
4.
Connect the terminal as in the illustra-
tion.
5.
Put the cable into the strain relief
clamp.
6.
Close the mains terminal cover.
CONNECTION DIAGRAM 400 V
L2 L3
400V
L1
PE
400V 3~
L2
400V
L1
PE
400V 2~
1
2
3
4
5
1
2
3
4
5
Phase definitions: L1, L2, L3 (or R, S,T)
WARNING!
If service is required always discon-
nect the appliance from the power
supply.
ELECTRICAL CONNECTION WITH THE HOB
You can connect the oven to an independ-
ent hob from the current range of Electro-
lux and AEG hobs. You can purchase the
necessary connection cable separately:
• AK - EB/GKTC (S) 1 m for ceramic hobs.
• AK - EB/GKTCi (S) 1 m for induction
hobs.
The hob connection socket is at the top of
the oven cabinet.
ENGLISH
29