BEFORE FIRST USE
WARNING!
Refer to "Safety information" chap-
ter.
INITIAL CLEANING AND
PREHEATING
• Remove all parts from the appliance.
• Clean the appliance before first use.
• Heat up the empty appliance at 150°C
for 30 minutes with
or
function
Refer to chapter "Care and Clean-
ing".
FIRST CONNECTION TO THE
MAINS
After first connection to the mains all sym-
bols in the display are on for some sec-
onds. For the subsequent few seconds the
display shows software version.
FIRST SETTING THE TIME OF
DAY
After the software version goes off, the dis-
play shows "h" and "12:00".
Setting the time of day:
1.
Touch
or
to set hours.
2.
Touch
.
3.
Touch
or
to set minutes.
4.
Touch
or
.
The Temperature/Time display shows new
time.
Changing the time of day
You can change the time of day only if the
appliance is off.
Touch
.
flashes in the display. To set
new time of day use the above procedure.
8
www.electrolux.com