Problem
Possible cause
Solution
There is no voltage in the
mains socket (try to con-
nect another appliance in-
to it).
Call an electrician.
9.1
Customer Service
If your appliance is still not working prop-
erly after making the above checks, con-
tact the nearest service centre.
To obtain fast service, it is essential that
when you apply for it you specify the
model and serial number of your appli-
ance which can be found either on the
guarantee certificate or on the rating plate
located on the external right side of the
appliance.
9.2
Replacing the lamp
1.
Disconnect the mains plug from the
mains socket.
2.
Replace the used lamp with a new
lamp of the same power and specifi-
cally designed for household applian-
ces. (the maximum power is shown
on the lamp cover)
3.
Connect the mains plug to the mains
socket.
4.
Open the lid. Make sure that the lamp
comes on.
WARNING!
Do not remove the lamp cover at
the time of replacement.
Do not operate the freezer if the
lamp cover is damaged or miss-
ing.
10.
INSTALLATION
10.1
Positioning
WARNING!
If you are discarding an old appli-
ance that has a lock or catch on
the lid, you must ensure that it is
made unusable to prevent young
children being trapped inside.
The appliance shall have the plug
accessible after installation.
This appliance can be installed in a dry,
well ventilated indoor (garage or cellar),
but for optimum performance install this
appliance at a location where the ambient
temperature corresponds to the climate
class indicated on the rating plate of the
appliance:
Cli-
mate
class
Ambient temperature
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
ENGLISH
27
