Electrolux ECF24460W, User Manual

6

electrolux

EN

Brown - Live: must be connected to
the terminal marked "L" or coloured
red.

Upon completion there must be no cut,
or stray strands of wire present and the
cord clamp must be secure over the
outer sheath.

Warning!

This appliance must be

earthed.

First use

Before first use, the freezer should be
cleaned inside, see chapter "Care and
cleaning".
Plug in the appliance.
Press button (A) to switch the
appliance on.
The display will illuminate.
The symbol (

) will flash on the

display and the alarm will beep, since
the temperature inside the freezer is
not yet sufficiently low for food
storage.
Press button (E) to switch the alarm
off. The symbol (

) will normally stop

flashing after several hours.
Only place food inside the freezer
once the symbol (

) has gone. The

temperature of the freezer is set to
reach -18°C, which is the optimal
storage temperature as set in the Eco
Mode (

)

Switch on-off

Switch on the freezer

Press button (A) to switch the
appliance on.
The display comes on.

Switch off the freezer

Press button (A) for more than one
second until the countdown "3-2-1"
disappears and you hear a sequence
of beeps.
The display goes off.

Warning!

Do not place objects on the

control panel, as they might accidentally
switch off the freezer.

Daily use

Temperature adjustment

The temperature may be adjusted
between -15°C and -24°C. We suggest
setting the freezer temperature to -18°C,
which guarantees proper freezing and
conservation of frozen food.

Press button (B) several times until the
desired temperature is reached.
The temperature on the display
flashes and indicates the temperature
set.
Press button (E) to confirm the desired
temperature. You will hear a beep.
The temperature on the display stops
flashing again and indicates the
temperature inside the freezer.
The newly adjusted temperature is
reached after several hours. During
this time it is normal that the
temperature displayed is different from
the temperature set.