Electrolux ECS 1647, Instruction Book

16

Positioning

Place the freezer horizontally on a firm surface,

resting on all four wheels.  Use a wooden block or

similar object to compensate for any bumps/holes

in the floor's surface.
The room should be dry and adequately ventilated.
If the room temperature exceeds 32°C, or falls

below freezing point, the freezer will not function as

it should.
Do not place the freezer close to sources of heat,

radiators, chimneys, etc. and do not place the

freezer in direct sunlight.
If the freezer has been handled standing on end, it

should be allowed to stand in the normal position

for about 12 hours before switching it on.
Ensure that the appliance is installed where it is

easily accessible for the engineer in the event of a

breakdown.

Technical Specifications

Installation

Model ECS 

1647

Volume (gross)      

litres

Volume (net)        

litres

Height with wheels

cm

With               

cm

Depth               

cm

Weight              

kg

Energy consumpt./24h 

kWh

Freezing capacity

kg/24h

Hold-over time         

hours

Rated 

power 

 W

163
159

87,6

93,5
66,5

45

0,50

21

43
75

this appliance complies with the following EC Directives:

- 73/23/EEC of 19. 02. 1973 - Low-Voltage Directive

- 89/336/EEC of 03. 05. 1989 (including Amendment Directive 92/31/EEC - EMC Directive.

Some of the models are not available in all countries.

Testing has been carried out in accordance with ISO 5155 regarding the determination of freezer capacity, energy consumption and hold-overtime.

Information for test institute: A plan of the positioning of test packages may be obtained directly from the manufacturer.