g
6
0
Select the desired temperature
and wait until the temperature con-
trol light goes out.
0
Press the steam jet button
(Fig. 1/F) several times with the
iron on the soleplate to prime the
pump.
3
If the water tank has run dry, it may
be necessary to re-prime the pump
after filling the steam iron with
water.
3
The steam iron is equipped with a
drip-stop system. This system
automatically stops water flowing
to the steam chamber should the
temperature fall too low to gener-
ate steam. This prevents dripping,
even at low temperatures.
Steaming hanging items of
clothing
3
The vertical steam jet function is
ideal for steaming curtains, suits
and delicate fabrics.
0
Hang the article concerned on a
hanger and hold the steam iron at a
distance of 10–20 cm from the
material.
0
Now press the steam jet button
(Fig. 1/F).
1
Do not attempt to freshen up
clothing whilst it is still being worn.
Risk of burning!
Care and Cleaning
After each use
0
Turn the power off and remove the
plug from the power outlet.
0
Allow the steam iron to cool before
winding the cord around the built-
in cord wrap (Fig. 1/N).
Storage
0
Always store the steam iron on its
heel rest (see Fig. 2).
Do not store the steam iron with
the soleplate facing down, or in the
carton.
Cleaning
0
To clean the exterior of the steam
iron, wipe with a damp soft cloth
and wipe dry.
1
Do not use harsh abrasives, chem-
ical cleaners or solvents, as these
will damage the surface.
Cleaning the removable
steam valve
0
To remove the steam valve, turn
the steam selector anticlockwise
to the "clean" setting so that the
steam valve pops up (see Fig. 3).
0
Gently scrub the tip of the valve
with a steel wool soap pad mois-
tened in warm water.
0
Rinse and dry with a clean cloth.
0
Replace the steam valve and turn
clockwise to lock into position.
Cleaning the steam holes
0
To remove scale build up in the
steam holes that may affect your
iron’s steam performance, use a
cotton wool tip moistened in meth-
ylated spirits.
Cleaning the Stainless Steal
soleplate
1
Do not use scouring pads, abra-
sives or harsh cleaners to clean
your soleplate, as these will
scratch and damage the surface.
0
To remove burnt residue from the
soleplate, iron over a damp cloth
while the steam iron is hot.
0
Using a stainless steel or metal
cleaner, rub gently with a damp
cloth and wipe dry.
822 949 465_EDB7510U.book Seite 6 Montag, 26. Januar 2009 9:45 21
