background image

10

when the small door at the bottom is open.

To confirm this option press «

Exit

» button.

Note!

This option

cannot 

be selected with the vocal

messages and the icon 

has been disactivated.

Set Up 

menu:

Menu option is used for selecting various basic
settings without affecting the particular drying
programme. These basic settings will remain active
until they are deselected/modified. 
To move through the different Menu settings use the
«

Option

» button. To change/confirm the selected

setting use the «

Change

» button.

Memory

Programme settings that are frequently used can be
saved. There are 2 memory spaces available for this
purpose. The saved programme can be selected in
the same way as any other drying programme by
means of the selector dial.
Example: Cotton Extra Dry, 1200 rpm, No Buzzer and
Dry Level option).

1. Select the cycle and programme settings

.

2. Enter the Menu option and select one of the

memory positions. «Store programme?»
message will appear in the display.

3.

To memorise the selected programme press the
«Change» button. «Stored» message will appear
in the display.

Change

Options

Exit

Memory 1

Store programme?

B

B

Temp.

Spin

Change

Options

Exit

Setup

A

A

Temp.

Spin

Change

Options

Exit

Cotton extra

Cycle end at

08.30

10.55

1200

Door

Spin

To change the memorised programme setting repeat
the procedure from the beginning.

Sound

The sound setting permits you to modify the volume
of the sound emitter. You can choose between
different levels: low, no sound and normal.

Example:

1. Enter the Menu option and select the sound

setting.

2.

Use the «Change» button to select the desired
level.

Note!

This option

cannot 

be selected with the vocal

messages. 

If the vocal messages is activated, then you can
choose between different levels: low, medium and
maximum.

Water Hardness

Y

ou can change the water hardness choosing 3

different degrees (see the chapter «Adjusting the level
of conductivity» on page 5)

.

Change

Options

Exit

Sound

Low or No Sound

Temp.

Spin

Change

Options

Exit

Sound

Normal

Temp.

Spin

Change

Options

Exit

Programme Stored

Temp.

Spin

125981580 gb.qxp  2005-09-21  07:07  Page 10

Summary of Contents for EDC 5339




















Reviews: