background image

12

messages indicating operational errors during the
whole process.

warning messages.

Check that you have loaded the laundry”;

The messages can be heard only once some
seconds after a new selection. On the contrary, the
warning messages are played immediately and
repeatedly until the cause is removed. 

Note!

This vocal board can speak several

languages. You can choose the machine speaking
language in the same way you select the one
appearing on the display. If you choose a language
not provided, an ugly jingle is played.

7 START/PAUSE Button

T

his button has 2 functions:

l

Start: after you have selected the desired
programme and options, press this button to
start the tumble dryer. The light close to the
button will stop flashing and remain lit.

If you have selected a delay time option, the
countdown will begin and will be shown on the
display.

l

Pause: when you press this button again, the
programme in progress is interrupted. The light
close to the button will start flashing. To restart
the programme, press the button again.

If the door is opened while the programme is running
the appliance immediately stops drying. The
«Pause» message appears in the display and the 
icon is shown above the Door button. 

The appliance immediately stops drying, the
«Pause» and «Please close condenser door»
messages appear in the display also when the
condenser door is opened.

This button must be pressed again after closing the
door in order to restart the programme from the
point at which it was interrupted.

This button must also be pressed after a power
failure and after having re-inserted the water
reservoir. 
If it has been emptied in the middle of a
programme after«The tank is full, please empty»
message and an acoustic signal has sounded.

In both cases the light of the Start/Pause 

button

flashes to remind you that the start button needs to
be pressed again.

125981580 gb.qxp  2005-09-21  07:07  Page 12

Summary of Contents for EDC 5339




















Reviews: