background image

17

ENGLISH

You must 

disconnect

the appliance from the

electricity supply, before you can carry out any
cleaning or maintenance work.

External cleaning

Use water with a little mild washing-up liquid added
rinse and then dry thoroughly.

Important:

do not use methylated spirit, diluents or

similar products.

Cleaning the door

Clean periodically the interior part of the door to
remove any fluff from the seals around the filter.
Regular cleaning ensures correct drying.

Cleaning the filters

Your dryer will only function well if the filters are
clean.
The filters collect all the fluff which accumulates
during drying and they must therefore be cleaned at
the end of each programme, before removing the
laundry, with a damp cloth. The «

Please clean

filters

» message appears on the display to remind

you to carry out this operation

.

The filter in the inner door must be removed for
cleaning.
Do not be alarmed by the amount of fluff. It is not
due to excessive wear caused by the dryer. All fabric
looses fluff when drying but it goes un-noticed in the
air. In a tumble dryer it simply collects in the filter.

A U

T O R

E V E

R S E

kg 5
kg 2,5

800 / 90

0

 

70' - 90

'

 35' - 50

'

 1000 / 1

200

  

65' - 85

'

  30' - 4

5'

   

800 / 90

0

  

80' - 10

0'

  55' -  7

0'

 

1000 / 1

200

  75' - 9

5'

  50' - 6

5'

    

 650

50' - 60

'

30' - 35

'

kg 2,5
kg 1

P1151

P1110

A U

T O R

E V E

R S E

kg 5
kg 2,5

800 / 90

0

 

70' - 90

'

 35' - 50

'

 1000 / 1

200

  

65' - 85

'

  30' - 4

5'

   

800 / 90

0

  

80' - 10

0'

  55' -  7

0'

 

1000 / 1

200

  75' - 9

5'

  50' - 6

5'

    

 650

50' - 60

'

30' - 35

'

kg 2,5
kg 1

P1150

Maintenance and Cleaning

After a while, a whitish patina due to detergent
residue on laundry forms on the filters. When this
occurs, clean the filters with warm water using a
brush. Remove the filter in the door opening as per
picture (it can be positioned with the tooth facing to
the left or to the right).

Do not use the appliance without filters.

Cleaning the condenser unit

Clean the air condenser when the «

Please clean

condenser

» message appears on the display.

The condenser is situated at the lower part of the
cabinet behind a small door. To open the door, push
the catch as per picture.

During the drying cycle or at the end, it is normal
for water to be present on the surface of the
condenser.

To pull out the condenser, first turn the two red
stops downwards as shown below and then remove
the condenser unit holding it at the handle.

P11

55

P11

54

P11

53

A U

T O R

E V E

R S E

kg 5
kg 2,5

800 / 90

0

 

70' - 90

'

 35' - 50

'

 1000 / 1

200

  

65' - 85

'

  30' - 4

5'

   

800 / 90

0

  

80' - 10

0'

  55' -  7

0'

 

1000 / 1

200

  75' - 9

5'

  50' - 6

5'

    

 650

50' - 60

'

30' - 35

'

kg 2,5
kg 1

P1152

125981580 gb.qxp  2005-09-21  07:08  Page 17

Summary of Contents for EDC 5339




















Reviews: