AUS
Drying cycle lasts an
unusually long time.
Note:
After around 5 hours
the drying cycle ends
automatically (see
„Drying cycle complete“)
●
Lint filter clogged.
●
Heat exchanger clogged with
lint.
●
DELICATE button pressed
and load volume too big.
●
Load volume too big.
●
Laundry insufficiently
predrained.
●
Clean lint filter
●
Clean heat exchanger.
●
DELICATE is only suitable for
use with loads of up to 3 kg!
●
Reduce load volume.
●
Laundry must be adequately
pre-drained.
Malfunction
Possible cause
Solution
When pressing a button,
the corresponding
button flashes several
times.
●
Washing protection.
After the start of the program-
me, the option can no longer
be set.
●
Turn the programme knob to
OFF. Set the programme
again
Programme inactive,
W
Wa
atte
err rre
es
se
errv
vo
oiirr ffu
ullll
light illuminated.
:
●
Condensate tank is full.
●
Empty condensate tank, then
start programme with
START/PAUSE button.
Drying cycle ends
shortly after programme
starts. END
light illuminated.
●
Not enough washing loaded
or washing loaded is too
dry for selected programme.
●
Select time programme or
higher drying level (e.g. EXTRA
DRY instead of CUPBOARD).
something not working
electrolux
23
Loading door does not
close.
●
Fine strainer not in place
and/or large mesh filter not
locked in place.
●
Install fine strainer and/or
snap large mesh filter into
place.
Summary of Contents for EDC 66150W
Page 1: ...user manual EDC 66150W Intuition Advanced Drying System Condenser Dryer ...
Page 2: ......
Page 29: ......
Page 30: ...136904161 02 12022008 ...