14
If after the above checks, there is still a fault, call your
local Electrolux Service Centre.
When you call the Service Centre please make sure
you give the model and serial number of the
appliance.
This information can be found on the rating plate (see
picture).
Something Not Working
• The tumble dryer does not
start:
• The door has not been closed.
• The plug is not properly inserted in the power socket.
• There is no current at the socket
• The main fuse has blown.
• The programme selector dial is incorrectly
positioned.
• The START button has not been depressed.
• Drying takes too long or
laundry is not dry enough:
• The laundry has not been spun properly.
• The filter is clogged up.
• The room temperature is too high.
• Has the correct programme been chosen?
• The Low Temperature Button has been
depressed, although full heating should be used
for drying.
• There is too much laundry inside the appliance.
• The dryer is not correctly installed.
• The vent hose is squashed.
Symptom
Possible causes
P0307
Mod. ...
Prod. No. ........
Ser. No. ............
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without
calling out an engineer. Before contacting your local Service Centre, please carry out the checks listed below.
125995195.qxp 2005-03-16 10:35 Page 14