Electrolux EDH803Q7WB, User Manual

You can delay the start

of a programme from a

minimum of 30 minutes

to a maximum of 20

hours.

3. Press the Start/Pause touch button.

The display shows the countdown of the

delay start.

When the countdown is completed, the

programme starts.

10.3 Change a programme

1. Press the on/off button to deactivate

appliance

2. Press the on/off button to activate the

appliance.

3. Set the programme.

10.4 At the end of the

programme

When the programme is completed:
• An intermittent acoustic signal

operates.

• The display shows 

• The indicator   is on.
• The indicators   Filter and 

 Tank

may come on.

• The Start/Pause indicator is on.

The appliance continues to operate with

the anti-crease phase for approximately

30 minutes or more if Extra Anticrease

option was set (see chapter 

Option -

Extra Anticrease

 ).

The anti-crease phase reduces creasing.
You can remove the laundry before the

anti-crease phase is completed. We

recommend, for better results, that you

remove the laundry when the phase is

almost completed.
When the anti-crease phase is

completed:

• The display still shows 

• The indicator   is off.
• The indicators   Filter and 

 Tank

remain on.

• Start/Pause indicator goes off.

1. Press the on/off button to deactivate

the appliance.

2. Open the appliance door.

3. Remove the laundry.

4. Close the appliance door.

Possible causes of unsatisfactory drying

results:
• Inadequate default dryness level

settings. See chapter 

Adjustment of

default dryness level

• Room temperature is too low or too

high. Optimal room temperature is

between 18°-25°C.

Always clean the filter and

empty the water container

when a programme is

completed.

10.5 Stand-by function

To reduce energy consumption, this

function automatically deactivates the

appliance:
• After 5 minutes if you do not start the

programme.

• After 5 minutes from the end of the

programme.

www.electrolux.com

18