Electrolux
EFS – Dishwashing Systems Platform
Electrolux Professional
Electronic Dishwasher
SERVICE MANUAL
DOC. NO. 5956.446.06
©Copyright 2005 by
Electrolux Professional
P.30/88
LS12HD Prog.
007
1.
Switch OFF and then switch ON the machine.
2.
CFG
Enter into CFG parameter family and set the following parameters:
tYP 0
Hood Type like working cycles.
boi 0
Atmospheric boiler.
doo 1
Manual Hood.
dFL 1
Default values for Hood Type models.
trc 0
(for this appliance SOFT START is NOT possible).
b_t 1
Tank heater works only if boiler temperature reached.
btF 75
Enable filling tank by means of rinsing cycles.
LES 0
Detergent level switches not enabled.
UI 9
Select user interface hood type model
(up to version 3.11 set to
1
)
.
rE 0
Regeneration cycle disabled.
ALr 1
Alarms enabled.
3.
Switch OFF and then switch ON the machine.
4.
Modify the cycle parameters:
CY1
Enter into Cycle 1 parameters family.
Pr1
20
Pre-rinse Duration [s]
dr1
36
Drain [s]
CY2
Enter into Cycle 2 parameters family.
Pr2
20
Pre-rinse Duration [s]
dr2
36
Drain [s]
CY3
Enter into Cycle 3 parameters family.
Pr3
20
Pre-rinse Duration [s]
dr3
36
Drain [s]
5.
Switch OFF and then switch ON the machine.