Electrolux
EFS – Dishwashing Systems Platform
Electrolux Professional
Electronic Dishwasher
SERVICE MANUAL
DOC. NO. 5956.446.06
©Copyright 2005 by
Electrolux Professional
P.65/88
LU7A
Prog. 041
1.
Switch OFF and then switch ON the machine.
2.
CFG
Enter into CFG parameter family and set the following parameters.
tYP 0
Hood Type like working cycles.
boi 0
Atmospheric boiler.
doo 2
Front loading.
dFL 1
Default values for Hood Type models.
trc 3
SLOW SOFT START ENABLED
b_t 1
Tank heater works only if boiler temperature reached.
btF 75
Enable filling tank by means of rinsing cycles.
LES 0
Detergent level switches not enabled.
UI 9
Select user interface hood type model
(up to version 3.11 set to
1
)
.
rE 0
Regeneration cycle disabled.
ALr 1
Alarms enabled.
3.
Switch OFF and then switch ON the machine.
4.
Modify Factory parameters:
FAC
Enter into FAC parameter family and change boiler threshold.
bt°C 82
Boiler Temperature Threshold.
bAJ 0
Boiler Temperature Adjust.
bSt 1
Booster Function.
5.
Modify the cycle parameters:
CY2
Cycle 2 parameters family.
Ln2
1
Long Wash Phase [min]
Sh2
10
Short Wash Phase [s]
CY3
Cycle 3 parameters family.
Ln3
4
Long Wash Phase [min]
6.
Switch OFF and then switch ON the machine.