Electrolux EEA22100L, User Manual

2. Press 

.

The light related to the button is on.

ExtraPower is not a

permanent option and must

be activated every time

before you start a

programme.

It is not possible to activate

or deactivate ExtraPower

while a programme is

running.

Activating ExtraPower

increases the water and

energy consumption as well

as the programme duration.

8.5 How to start the AUTO

Sense program

1. Press 

.

The light related to the button is on.

MY TIME and ExtraPower

are not applicable to this

program.

2. Close the appliance door to start the

program.

The appliance senses the type of load

and adjusts a suitable wash cycle and its

duration.

8.6 How to delay the start of a

programme

You can delay the start of the selected

programme by 3 hours.
1. Select a programme.
2. Press  .

The light related to the button is on.

3. Close the appliance door to start the

countdown.

During the countdown, it is not possible

to change the programme selection.
When the countdown is complete, the

programme starts.

8.7 How to cancel the delay

start while the countdown

operates

Press and hold   for about 3 seconds.

The appliance returns to the programme

selection.

If you cancel the delay start,

you have to select the

programme again.

8.8 How to cancel a running

programme

Press and hold   for about 3 seconds.

The appliance returns to the programme

selection.

Make sure that there is

detergent in the detergent

dispenser before you start a

new programme.

8.9 Opening the door while the

appliance operates

Opening the door while a programme is

running stops the appliance. It may affect

the energy consumption and the

programme duration. After closing the

door, the appliance continues from the

point of interruption.

If the door is opened for

more than 30 seconds

during the drying phase, the

running programme ends. It

does not happen if the door

is opened by AirDry function.

8.10 The Auto Off function

This function saves energy by switching

the appliance off when it is not operating.
The function comes into operation

automatically:

• When the programme is completed.

• After 5 minutes if a programme was

not started.

ENGLISH

15