background image

Children between 3 and 8 years of age and persons

with very extensive and complex disabilities shall be

kept away from the appliance unless continuously

supervised.

Children of less than 3 years of age should be kept

away from the appliance unless continuously

supervised.

Do not let children play with the appliance.

Keep detergents away from children.

Keep children and pets away from the appliance when

the door is open.

Children shall not carry out cleaning and user

maintenance of the appliance without supervision.

1.2 General Safety

This appliance is intended to be used in household

and similar applications such as:

farm houses; staff kitchen areas in shops, offices

and other working environments;

by clients in hotels, motels, bed & breakfast and

other residential type environments.

Do not change the specification of this appliance.

The operating water pressure (minimum and

maximum) must be between 0.5 (0.05) / 10 (1.0) bar

(MPa)

Follow the maximum number of 13 place settings.

If the supply cord is damaged, it must be replaced by

the manufacturer, its Authorised Service Centre or

similarly qualified persons in order to avoid a hazard.

WARNING: Knives and other utensils with sharp

points must be loaded in the basket with their points

down or placed in a horizontal position.

Do not leave the appliance with the open door

unattended to avoid stepping accidentally onto it.

Before any maintenance operation, deactivate the

appliance and disconnect the mains plug from the

socket.

www.electrolux.com

4

Summary of Contents for EEQ67410W





































Reviews: