Electrolux EFC 009 X, User Manual

42

Correct ventilation

To have the cooker hood working correctly the
windows in the kitchen should be closed. In stead
a window in an adjacent room should be open.
(Fig. 13)

Maintenance

Before performing any maintenance
operation, disconnect the hood from
the electricity.

Grease filter

This serves to hold the grease particles in suspen-
sion.
The metal filter should be washed when the grease
filter saturation LED flashes, normally once per
month.
Wash it with warm soapy water or, if possible, in
the dishwasher (60°C).
Let dry before reinstalling.

Carbon filter

This filter dissolves cooking odours.
It should be changed when the Carbon filter
saturation LED flashes. Ask the technical assist-
ance service or manufacturing company for a new
one.
The carbon filter must never be washed.
To remove the carbon filter, first remove the
grease metal filters and then unscrew the two
screws that holds the grease filter and pull the
filter down (Fig. 12).

Cleaning

To clean the outside of the hood use a cloth mois-
tened with denatured alcohol or neutral liquid
detergents. Never use products containing
abrasives.

Carbon filter saturation led

The LED marked C indicates carbon filter needs
to be replaced.
This must be done after approximately 160
hours of use.
Read the instructions provided for replacing the
carbon filter.

To restore the LED for the filter
warnings.

After cleaning of the grease filter and exchange
of the carbon filter, press button A for about 3
seconds until the LED F stops flashing.

Fig. 13

Attention

Failure to observe the rules for cleaning the appli-
ance and changing and cleaning the filters may
cause fires. Therefore, we recommend observing
these instructions.

Changing the lighting elements

l

With the help of a screwdriver remove the screw
that secures the lens (Fig. 14).

l

Remove the lens

l

Replace the damaged part with one of equal
rating.

l

Mount the lens and secure it with the screw.

Fig. 14