Electrolux EFC 009 X, User Manual

37

Special accessories

Active carbon filter

When the hood is used in recirculation mode an
active carbon filter should be used.
Order by the retailer
PNC 942 120 182

Installation

Unpacking

Check that the cooker hood has no damages.
Transportation damages should immediately be
reported to the one responsible for the transport
Damages, faults and eventually missing details
should immediately be reported to the seller.
Take care of the packing material so that small
children cannot play with it.

Placement

The hood is to be mounted hanging from the roof.
When installed, the hood must be not less than 65
cm. above electric burners or 75 cm. above gas or
mixed-fuel burners. (Fig. 4).

Electrical connection

The hood has a power cord with moulded plug
with earth connection to be connected to a wall
outlet of 230 V.
The power outlet should be pre-mounted in such a
way that the power cord is invisible when the hood
is fully mounted.
The power cord length is 1,25 m.

As it is then hard to disconnect the
power plug for cleaning and service,
an easy accessible two pole switch

should be fitted. The switch should conform to
regulations with an opening distance between
contacts of not less than 3 mm.

Min

75 cm

Min

65 cm

Fig. 4