Electrolux EFC 009 X, User Manual

38

!

Mounting of hood

First set the telescopic support structure on the
right direction and drill as indicated on the drilling
scheme supplied with the hood.

l

The two sections of the structure are fixed one
each other with 8 screws (fig. 5- "a").
Remove all screws, regulate the lenght of the
structure according the exigencies, fit again the
8 screws.
In order to install the cooker hood at the right
height consider also that the height of the body
of the hood is 290 and that a minimum distance
from hobs must be in any case respected (see
paragraph "Placement").

Choose how to use the hood:

Exhausting version

l

Fit a Ø 150 mm exhausting pipe  or flex tube on
the ceiling sufficiently long to reach the connec-
tion ring above the hood, once the hood will be
fit on place.

Recirculating version

l

Fit the deflector from one side of the slots of the
upper section of the telescopic supporting
structure (Fig. 6).

Attention!
Slots used must be those perpendicular to the
top fixing points for chimney unit.

l

Fix the deflector with bracket supplied and 4
screws 2,9x6,5 (Fig. 6).
Fix the deflector also on the other side of the
structure with two other screws same shape.

l

From the bottom of the telescopic supporting
structure fit the connection ring supplied
(bajonett attachment- turn clockwise and fix
definitively with one screw 2,9x9,5). (Fig. 7)

l

Fit a section of pipe or flex tube Ø 150 mm
sufficiently long to reach the connection ring of
the hood once this hood will be fit on place
(Fig. 7).

Fig. 7

Fig. 6

c

b

b

b

a

a

Fig. 5