what to do if …
electrolux
13
What to do if
…
Problem
Possible cause
Remedy
The appliance cannot be
switched on or is not operating
More than 10 seconds have
passed since the appliance
was switched on
Switch appliance on again
Several sensor fields were
touched at the same time
Only touch one sensor field
The sensor fields are partly
covered by a damp cloth or
with liquid
Remove the cloth or the liquid.
Switch appliance on again
Electronics fault
Disconnect appliance from the
electrical supply for a few min-
utes. (Take the fuse out of the
house’s wiring system.)
If the appliance still does not
operate after switching on
again, call the Customer Care
Department
Fuses keep blowing
Too many electrical appliances
are connected
Switch off electrical appliances
The fan is switched off, but the
down draught extractor is
raised
There was a power cut during
operation
Switch on down draught ex-
tractor and touch
e
is displayed
Filter sensor has responded.
Clean filter and reset filter sen-
sor (see section “Cleaning and
Care”)
Down draught extractor has
switched off automatically and
cannot be switched on again
Vertical adjustment of the
down draught extractor has
become jammed
Disconnect appliance from the
electrical supply for a few min-
utes. (Take the fuse out of the
house’s wiring system.)
If the appliance still does not
operate after switching on
again, call the Customer Care
Department
Summary of Contents for EFD18000U
