48
Maintenance
Before performing any maintenance
operation, disconnect the hood from
the electricity.
Grease filter
This serves to hold the grease particles in suspen-
sion. The metal filter should be washed every
month with warm soapy water or, if possible, in the
dishwasher (60°C).
To remove the metal grease filter, fold the grips
upwards and press the locking slide in at the side
(Fig. 5). Leave to dry before refitting it.
l
(Only EFG 732): remove central plastic strip Z
to free the two filter panels (Fig. 11).
Clean the panels support as well.
Carbon filter
This filter dissolves cooking odours.
It should be changed every 6-8 months in normal
use. The carbon filter must never be washed.
To exchange the carbon filter:
l
Remove the grease filter
l
Take the old carbon filter out by pressing in the
two red lugs (2-Fig. 9) and pull it out forwards.
l
Fit the new carbon filter first on the lamp side of
the hood (1-Fig. 9), press the two red lugs of the
filter and clip the filter upwards into the hood.
l
Refit the grease filter.
Attention
Failure to observe the rules for cleaning the appli-
ance and changing and cleaning the filters may
cause fires. Therefore, we recommend observing
these instructions.
Cleaning
To clean the outside of the hood use a cloth mois-
tened with denatured alcohol or neutral liquid
detergents. Never use products containing
abrasives.
Changing the lighting elements
l
Disconnect the hood from the electricity.
l
Open the light cover by turning the latches
counterclockwise 1 (Fig. 12 and 13).
l
Pull the old lamp out of the holder and replace it
with a new of same rating
EFG 732 X has 2 PL lamps of 9 W (Fig. 12).
EFG 532 X has 1 PL lamp of 11 W (Fig. 13).
Fig. 12
Fig. 13
Z
Fig. 11
Summary of Contents for EFG 532 X
Page 51: ......
Page 52: ...L 583 1007 ACK ...
