31
Description of the appliance
1. Light switch
2. Motor speed switch
3. Work light
4. Suction grid with grease filter
Standard accessories included:
●
Template for mounting on wall and under
cupboard
●
Screws:
●
Duct with no return valve
●
Cover for unused outlet hole
Function
The hood may be used as follows:
- For air exhausting
- For air recycling
Exhausting
The appliance has two exhaust outlets; D and E
(Fig. 2).
Important! To use the back hole E, remove air
switch F from the top hole.
Connect the hood to the smoke exhaust hose by
using the connecting ring G with no return valve
(bayonet coupling).
Insert plug H in the unused exhaust hole (bayo-
net coupling).
Plug H is for closing the unused hole.
Attention! In the horizontal runs the duct must be
slightly slanted (about 10
°
) and directed upwards
to vent the air easily from the room to the out-
side.
The hood cannot be connected to
flues of other appliances that run on
energy sources other than electricity.
Please keep to the provisions of official directives
regarding the question of fumes discharge.
Recycling
The air is filtered through a carbon filter and
recirculated into the room through the front grid
(fig. 3).
This version is used when there is no exhaust
duct for venting outdoors or when it is impossi-
ble to install one.
0 I
0
Fig. 2
Fig. 3
Fig. 1
D
E
G
H
D
E
F
3
4
2
1
Summary of Contents for EFT 629
Page 10: ...1007WW L 695 A Ed 12 96 ...