49 electrolux
troubleshooting
troubleshooting
electrolux 50
ENG
ENG
The freezer is working normally,
removing warm air from inside the
freezer.
They require a high speed
compressor. This condition is normal.
This is normal. Sound will level off or
disappear as freezer continues to run.
This is normal. Sound will level off or
disappear as freezer continues to run.
Call a qualified electrician.
See item “freezer does not run”.
Be sure floor can support the freezer
properly. Level the floor by putting
wood or metal shims under the part
of the freezer that is not level.
This condition can force the cabinet
out of square and misalign the lid.
The freezer temperature is warm when
you touch the freezer.
Modern freezers have increased
storage capabilities and more uniform
temperatures.
Freezer operates at higher pressures
during the start of the ON cycle.
Metal parts undergo expansion and
contraction, as in hot water pipes.
Light bulb is not on
Led can be blown.
No electric current is reaching the
freezer.
Floor is uneven or weak. Freezer rocks
on the.
Freezer is not level. It rocks on the
floor.
Louder sound levels when compressor is ON
Popping or cracking sound when compressor comes ON
Temperature of outer freezer surface is warm
Louder sound levels whenever freezer is ON
Lid does not close
This is normal.
Adjust the leveling screws.
Be sure the floor can support the
freezer properly. Level the floor by
putting wood or metal shims under
the part of the freezer that is not
level.
Level the freezer or move it slightly.
This is normal.
See item “lid does not close”.
Refrigerant (used to cool freezer) is
circulating throughout the system.
Freezer is not level. It rocks on the
floor when it is moved slightly.
Floor is uneven or weak. Freezer
rocks on the
Weather is hot and damp, which
increases the internal rate of frost
buildup.
Vibrating noise
Freezer is touching the wall.
Lid is slightly open, causing the cold
air from inside the freezer to meet
warm damp air from outside.
Bubbling or gurgling sound, like water boiling
Moisture forms on inner freezer walls
Lid may be slightly open.
See item “lid does not close”.
Lid is kept open too long or too
frequently.
Warm air enters the freezer every
time the lid is opened. Open the lid
less often.
Moisture forms outside the freezer
