Electrolux EGD6576NOK, User Manual

Problem

Possible cause

Remedy

 comes on.

There is an error in the hob

because a cookware boils

dry. Automatic Switch Off

and the overheating protec-

tion for the zones operate.

Deactivate the hob. Re-

move the hot cookware. Af-

ter approximately 30 sec-

onds, activate the zone

again. If the cookware was

the problem, the error mes-

sage goes out. Residual

heat indicator can stay on.

Let the cookware become

sufficiently cool. Check if

your cookware is compati-

ble with the hob.

Refer to “Hints and tips”

chapter.

There is no spark when you

try to activate the spark

generator.

The hob is not connected

to an electrical supply or it

is connected incorrectly.

Check if the hob is correctly

connected to the electrical

supply.

The fuse is released.

Make sure that the fuse is

the cause of the malfunc-

tion. If the fuse releases

again and again, contact a

qualified electrician.

Burner cap and crown are

placed incorrectly.

Place the burner cap and

crown correctly.

The flame extinguishes im-

mediately after ignition.

Thermocouple is not heated

up sufficiently.

After lightning the flame,

keep the knob pushed for

equal or less than 10 sec-

onds.

The flame ring is uneven.

Burner crown is blocked

with food residues.

Make sure that the injector

is not blocked and the

burner crown is clean.

7.2 

If you cannot find a

solution...

If you cannot find a solution to the

problem yourself, contact your dealer or

an Authorised Service Centre. Give the

data from the rating plate. Give also an

error message that comes on.Make sure,

you operated the hob correctly. If not the

servicing by a service technician or dealer

will not be free of charge, also during the

warranty period. The instructions about

the Service Centre and conditions of

guarantee are in the guarantee booklet.

ENGLISH

17