46/59
Manuale di Installazione ed Uso
Rev.: A
Instruction and Installation Manual
7. SIGNALS AND ALARMS
On the control panel every button has a red LED to indicate when the button is
activated. There is also a two-digit display and a specific indicator for the level
of solution (as described in the section “Control panel”).
For information of visualization of shredding and sanitizing cycles, see previous
sections.
Alarm signal when liquid is nearly finished
During functioning, if the solution reaches minimum level in the tank, the
corresponding red LED on the control panel comes on and the acoustic signal
is activated.
This signifies that the tank contains enough liquid to guarantee completion of
any cycles begun, in addition to a few more cycles (depending on the sanitizing
cycle chosen).
The user must however fill the tank with solution as soon as the waste disposer
stops, following instructions in the section “Filling up the solution tank “.
"Warning"
If the user does not add more solution, the waste disposer has another
sensor that picks up the total absence of liquid and stops the waste
disposer working in alarm mode (see section “Alarm signals “).
