Electrolux EGS6343NOX, User Manual

• Never try to extinguish a fire with water, but switch off

the appliance and then cover flame e.g. with a lid or a
fire blanket.

• Do not store items on the cooking surfaces.
• Do not use a steam cleaner to clean the appliance.
• Metallic objects such as knives, forks, spoons and lids

should not be placed on the hob surface since they
can get hot.

2. 

  SAFETY INSTRUCTIONS

This appliance is suitable for the following
markets:   IT

2.1 

Installation

WARNING!

Only a qualified person must in-
stall this appliance.

• Remove all the packaging.
• Do not install or use a damaged appli-

ance.

• Obey the installation instruction sup-

plied with the appliance.

• Keep the minimum distance from the

other appliances and units.

• Always be careful when you move the

appliance because it is heavy. Always
wear safety gloves.

• Seal the cut surfaces with a sealant to

prevent moisture to cause swelling.

• Protect the bottom of the appliance

from steam and moisture.

• Do not install the appliance adjacent to

a door or under a window. This pre-
vents hot cookware to fall from the ap-
pliance when the door or the window is
opened.

• If the appliance is installed above draw-

ers make sure that the space, between
the bottom of the appliance and the up-
per drawer, is sufficient for air circula-
tion.

• The bottom of the appliance can get

hot. We recommend to install a non-
combustile separation panel under the

appliance to prevent access to the bot-
tom.

Electrical connection

WARNING!

Risk of fire and electrical shock.

• All electrical connections must be made

by a qualified electrician.

• The appliance must be earthed.
• Before carrying out any operation make

sure that the appliance is disconnected
from the power supply.

• Use the correct electricity mains cable.
• Do not let the electricity mains cable

tangle.

• Make sure the mains cable or plug (if

applicable) does not touch the hot ap-
pliance or hot cookware, when you
connect the appliance to the near sock-
ets

• Make sure the appliance is installed

correctly. Loose and incorrect electricity
mains cable or plug (if applicable) can
make the terminal become too hot.

• Make sure that a shock protection is in-

stalled.

• Use the strain relief clamp on cable.
• Make sure not to cause damage to the

mains plug (if applicable) or to the
mains cable. Contact the Service or an
electrician to change a damaged mains
cable.

• The electrical installation must have an

isolation device which lets you discon-

4

www.electrolux.com