Electrolux EGT6345, User Manual

• Never try to extinguish a fire with water, but switch off

the appliance and then cover flame e.g. with a lid or a
fire blanket.

• Do not store items on the cooking surfaces.
• Do not use a steam cleaner to clean the appliance.
• Metallic objects such as knives, forks, spoons and lids

should not be placed on the hob surface since they
can get hot.

• If the glass ceramic surface is cracked, switch off the

appliance to avoid the possibility of electric shock.

2. 

  SAFETY INSTRUCTIONS

This appliance is suitable for the following
markets:  GB

2.1 

Installation

WARNING!

Only a qualified person must in-
stall this appliance.

• Remove all the packaging.
• Do not install or use a damaged appli-

ance.

• Obey the installation instruction sup-

plied with the appliance.

• Keep the minimum distance from the

other appliances and units.

• Always be careful when you move the

appliance because it is heavy. Always
wear safety gloves.

• Seal the cut surfaces with a sealant to

prevent moisture to cause swelling.

• Protect the bottom of the appliance

from steam and moisture.

• Do not install the appliance adjacent to

a door or under a window. This pre-
vents hot cookware to fall from the ap-
pliance when the door or the window is
opened.

• If the appliance is installed above draw-

ers make sure that the space, between
the bottom of the appliance and the up-
per drawer, is sufficient for air circula-
tion.

• The bottom of the appliance can get

hot. We recommend to install a non-
combustile separation panel under the
appliance to prevent access to the bot-
tom.

Electrical connection

WARNING!

Risk of fire and electrical shock.

• All electrical connections must be made

by a qualified electrician.

• The appliance must be earthed.
• Before carrying out any operation make

sure that the appliance is disconnected
from the power supply.

• Use the correct electricity mains cable.
• Do not let the electricity mains cable

tangle.

• Make sure the mains cable or plug (if

applicable) does not touch the hot ap-
pliance or hot cookware, when you
connect the appliance to the near sock-
ets

• Make sure the appliance is installed

correctly. Loose and incorrect electricity
mains cable or plug (if applicable) can
make the terminal become too hot.

• Make sure that a shock protection is in-

stalled.

• Use the strain relief clamp on cable.

4

www.electrolux.com