similar accommodation where such use does not exceed
(average) domestic usage levels.
•
Only a qualified person must install this appliance and
replace the cable.
•
Do not use the appliance before installing it in the built-in
structure.
•
Disconnect the appliance from the power supply before
carrying out any maintenance.
•
If the mains power supply cable is damaged, it must be
replaced by the manufacturer, its Authorised Service Centre
or similarly qualified persons to avoid an electrical hazard.
•
The control panel must be connected to specified heating
unit with matching colours of connectors, to avoid possible
hazard.
•
The means for disconnection must be incorporated in the
fixed wiring in accordance with the wiring rules.
•
WARNING: Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of electric shock.
•
WARNING: The appliance and its accessible parts become
hot during use. Care should be taken to avoid touching
heating elements or the surface of the appliance cavity.
•
Always use oven gloves to remove or insert accessories or
ovenware.
•
Be careful when you touch the storage drawer. It can get
hot.
•
To remove the shelf supports first pull the front of the shelf
support and then the rear end away from the side walls.
Install the shelf supports in the opposite sequence.
•
Do not use a steam cleaner to clean the appliance.
•
Do not use harsh abrasive cleaners or sharp metal scrapers
to clean the glass door since they can scratch the surface,
which may result in shattering of the glass.
36
ENGLISH