Electrolux EHE5167S, User Manual

15

To refit crispers

1.  With the runners pushed in all the way.
2.   Slide the bin into place over the telescopic slides and 

under the shelf. Push the bin in until it stops, noting 
that the bin will not be closed all the way.

3.   Open the bin to access the finger tabs at the ends on 

each side of the bin. Use your thumb and forefinger to 
lift the bin over the end of the slide and clip in place.

4.  Fully close the bin.

 CaUTIon!

Never store solvents or flammable materials like nail 
polish remover or lighter fluid inside your refrigerator. 
They will affect the life of the plastic components and 
may taint stored food.

Door storage bins

Door storage bins adjust to meet different storage needs. 
all the door bins are completely removable for cleaning. 
If you want to remove or adjust a bin, lift it over the support 
lugs on the inner door panel. To replace, push the bin 
down over the support lugs to lock it in place.

Dairy compartment

Use the dairy compartment to store foods like butter, 
margarine and cheeses. The compartment is slightly 
warmer than the rest of the refrigerator compartment,  
while the lid provides protection against odours.

Deli compartment

Use the deli compartment to store foods like small goods, 
fresh or cooked meat and cheese, or as an additional 
crisper. The deli compartment will reduce strong food 
odours from creeping into the rest of the refrigerator.  
To remove the deli compartment, pull it forward, then lift it 
up and pull it further forward.

Bottle caddy

The bottle caddy is made of stainless steel. It is used to 
store various types of bottles like wine or beer. Bottles 
should be stored with the bottom end towards the back 
of the refrigerator. 

USING YOUR aPPLIaNCE

Freezer drawers

The drawer is mounted on telescopic extension slides, 
to enable full access to the contents. a clear plastic front 
provides easy visibility.

To remove the drawer for cleaning

1.  Empty food from the drawer.
2.   Remove the drawer by pulling it forward and lifting 

the front to unhook it from the slides. Once you have 
removed the drawer, ensure the slides are pushed 
back so they are fully closed.

 CaUTIon!

Never close the door while the telescopic slides 
are extended. This may damage the slide and/or 
refrigerator or cause the slide to become disengaged 
from the refrigerator.

To replace the drawer

1.  Push the telescopic slides in all the way.
2.   Slide the drawer into place over the slides and push 

the bin in until it stops. The bin will not be closed all  
the way.

3.   Open the bin to access the finger tabs at the ends of 

the telescopic slides, on each side of the bin. Using 
your thumb and forefinger, lift the bin over the end 
of the slide and clip in place. If the drawer is not fully 
engaged on the slide, it’s possible the drawer won’t 
stay on the slide if fully extended.

The end of slide must 
be clipped into place

4.   Fully close the bin. 

When replacing the drawers after cleaning, we 
recommend fitting the freezer bottom bin first.