Electrolux EHE5167S, User Manual

16

USING YOUR aPPLIaNCE

Slide away glass shelf (where fitted)

This shelf can be used either as a full depth shelf or when 
tall items need to be stored at the front of the appliance it 
can be collapsed to half its original depth. 

To collapse the shelf:
1.   Pull the front half of the shelf forward.

2.   Then, from the underside, lift the front half of the shelf 

by raising the rear edge over the recessed  
hook detail.

Hook detail

3.   Pull the shelf forward and allow the rear to drop into 

the side channels.

4.   Push the front shelf backwards (3,4) until it reaches 

the rear stops.

Repositioning the shelf:
 The shelf can be repositioned within the appliance 
unit by pulling the whole assembly out until the side panels 
are free to pivot down, then pivoting the rear of the shelf 
until the shelf is free from the liner runners. The shelf can 
then be positioned in any of the runners. This is a very 
useful feature if your appliance door happens to have 
limited access.

Freezer bottom bin

To remove the bin, pull the drawer out until it is open all the 
way then lift bin out from the front of the bin. When refitting 
insert the rear of the bin first then lower into position.

Spillsafe™ glass shelves

Spillsafe™ glass shelves keep spills on the shelf. a shelf 
retaining system minimises accidental movement of 
shelves and they can be adjusted to various heights. 
Spillsafe™ glass shelves are not to be used as slide out 
shelves.  
To remove the shelves, gently pull them forward until the 
shelf comes clear of the shelf guides. To return the shelf, 
make sure there is nothing behind that may obstruct 
movement. Gently push the shelf into the cabinet and  
back into position.