1.
Turn the knob to a necessary heat
setting.
2.
To complete the cooking process,
turn the knob to the off position.
5.9
Using the double zone (if
applicable)
To activate the double zone,
turn the knob clockwise. Do
not turn it through the stop
position.
1.
Turn the knob clockwise to position 9.
2.
Turn the knob slowly to the symbol
until you can hear a click. The two
cooking zones are on.
3.
To set the necessary heat setting refer
to "Heat settings".
6.
CLOCK FUNCTIONS
6.1
Clock functions table
Clock function
Application
TIME OF DAY
To set, change or check the time of day.
DURATION
To set how long the appliance operates.
END
To set when the appliance deactivates.
TIME DELAY
To combine DURATION and END function.
MINUTE MINDER To set countdown time. This function has no effect on the
operation of the appliance. You can set the MINUTE
MINDER at any time, also when the appliance is off.
6.2
Setting the time. Changing
the time
You must set the time before you operate
the oven.
The flashes when you connect the
appliance to the electrical supply, when
there was a power cut or when the timer
is not set.
In case of a power cut up to
1 hour, the time of day is
shown and flashes. Make
sure that the time is correct
and press to stop the
flashing.
In case of a power cut longer
than 1 hour, you must set the
time again.
Press the or to set the correct time.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.
To change the time of day press again
and again until starts to flash.
6.3
Setting the DURATION
1.
Set an oven function and temperature.
2.
Press again and again until
starts to flash.
3.
Press or to set the DURATION
time.
The display shows
.
4.
When the time ends,
flashes and
an acoustic signal sounds. The
appliance deactivates automatically.
5.
Press any button to stop the acoustic
signal.
ENGLISH
11
Summary of Contents for EHGL3DEEV
Page 1: ...EHGL3DEEV EN OVEN USER MANUAL ...
Page 35: ...ENGLISH 35 ...
