background image

15

Cleaning and Care

1

Take care! 

Risk of burns from residual heat. 

1

Warning! 

Sharp objects and abrasive cleaning

materials will damage the appliance. Clean
with water and washing up liquid.

1

Warning! 

Residues from cleaning agents will

damage the appliance. Remove residues with
water and washing up liquid.

Cleaning the appliance after each use

1.

Wipe the appliance with a damp cloth and a little
washing up liquid.

2.

Rub the appliance dry using a clean cloth.

Removing deposits

1.

Place a scraper on the glass ceramic surface at an
angle.

2.

Remove residues by sliding the blade over the sur-
face.

3.

Wipe the appliance with a damp cloth and a little
washing up liquid.

4.

Rub the appliance dry using a clean cloth. 

*Scrapers and cleaners for glass ceramic and stainless steel 

can be purchased in specialist shops

3

Remove stubborn residues with a cleaner for
glass ceramic or stainless steel.

3

Scratches or dark stains on the glass ceramic
that cannot be removed do not however affect
the functioning of the appliance.

Remove

Type of dirt

immedi-

ately

when the appliance has 

cooled down

using

sugar, food containing sugar

yes

---

a scraper*

plastics, tin foil

yes

---

limescale and water rings

---

yes

cleaner for glass ceramic 

or stainless steel*

fat splashes

---

yes

shiny metallic discolorations

---

yes

Summary of Contents for EHS 8671 P





























Reviews: