background image

The automatic heat up function

The automatic heat up function starts when
you set a heat setting starting from 

 . A

cooking zone operates with the maximum
power for some time and than automatically
switches back to the heat setting you set.
If you set a higher heat setting during the au-
tomatic heat up (for example from 

 to 

 ),

the automatic heat up is adjusted.
If there is still residual heat on the cooking
zone (display 

 ), the automatic warm up

does not start.
The time of the automatic warm up changes
for different heat settings:

1

2

3

4

5

6

7

8

9

10

11

0

1

2

3

4

5

6

7

8

9

Using the Timer

Use the timer to set how long the cooking
zone operates for one cooking session.

Set the timer after the selection of the
cooking zone.

You can set the heat setting before or after
you set the timer.

Selection of the cooking zone:

 touch

 again and again until the indicator of a

necessary cooking zone comes on.

Starting and changing the timer:

 touch

 or   of the cooking zone to set the time

00

 - 

99

 minutes). When the indicator of

the cooking zone flashes slower, the time
counts down.

Stopping the timer: 

 select the cooking

zone with 

 and touch   to switch off the

timer. The remaining time counts back-
wards to 

00

 . The indicator of the cooking

zone goes out. You can also touch 

 and

 at the same time to switch off the timer.

Checking the remaining time: 

 select

the cooking zone with 

 . The indicator of

the cooking zone flashes faster. Display
shows the remaining time.

When the time elapses, the sound operates
and 

00

 flashes. The cooking zone switches

off.

Stopping the sound: 

 touch 

 .

You can use the timer as a 

minute minder

while cooking zones do not operate. Touch

 . Touch 

 or   to select the time. When

the time elapses, the sound operates and

00

 flashes

 Starting the STOP+GO

The 

 function sets all cooking zones that

operate to a keep warm setting.

Touch 

 to start

 this function. The sym-

bol 

 comes on.

Touch 

 to stop

 this function. The heat

setting that you set before comes on.

 does not stop the timer function.
 fully locks the control panel but not the

sensor field 

 .

Locking / unlocking the control panel

You can lock the control panel, but not 

 .

It prevents an accidental change of the heat
setting during a cooking session.
Touch the symbol 

 . The symbol 

 comes

on for 4 seconds.
The Timer still operates.
Touch the symbol 

 to switch off this func-

tion. The heat setting that you set before
comes on.
When you switch off the appliance, you also
switch off this function.

The child safety device

This function prevents an accidental opera-
tion of the hob.

electrolux 

 7

Summary of Contents for EHS60140X













Reviews: