12
How to turn off a
burner
1. To turn off a burner press the relevant
Burner Ignition Touch Control
. All the
flame level indicators go off.
The residual heat indicator remains on
until the pan support and the burner have
cooled down.
In case of ignition
failure
The hob ignition device generates a series
of small sparks for about 6 seconds.
If the flame does not light during this period,
the gas flow to the burner is interrupted.
After 3 seconds, the ignition device
automatically repeats the ignition procedure
for another 6 seconds.
After three failed ignition attempts, a safety
device is set on the burner. The flame level
indicators flash.
Caution! When the safety device is
set on a burner, the burner controls
cannot be operated for about 60
seconds.
After 60 seconds, you can remove the safety
device on the burner by touching both the
Increasing Controls
and the Decreasing
Control
at the same time.
Then, follow the instructions given in the
paragraph “How to light a burner”.
Caution! Check that the burner cap
and crown are correctly positioned
(see diagram).
If the ignition problem persists, refer
to
chapter “Something not working”.
Never use a manual spark gas-lighter
if the burner ignition device does not
work correctly. If necessary, use a
match.
"
"
A
-
Burner cap
B
-
Burner crown
C
-
Spark plug
D
-
Thermocouple
A
B
C
D
