9
Maintenance and cleaning
Stainless steel surfaces
Perform daily cleaning with a slightly
damp cloth. For more severe soiling,
use a liquid scouring cream. Always
clean the steel in the direction of the
steel finish. To ensure that the steel
retains its shine, it is recommended
that you use a polishing agent for
stainless steel on a regular basis.
Always polish in the direction of the
steel finish (cross-wise).
Never use steel wool, metal sponges or
other abrasive cleaning agents.
Avoid saucepans boiling over. If you
have been so unfortunate as to get
water in the burner this water should
be removed before re-igniting the
burner, e.g. with a no-fluff cloth.
16
Radio-noise reduction
This unit observes the current EEC-
directive on radio noise reduction.
Material:
Stainless steel, ceramic
glass
Pansupport: Castiron enamelled
Built-in measurements:
Height:
60 mm
Width:
560 mm
Depth:
490 mm
Product measurements:
Height:
55 mm
Width:
580 mm
Depth:
510 mm
Weight:
13 kg
"THIS APPLIANCE MUST BE
CONNECTED TO AN EARTHED
GENERAL PURPOSE OUTLET."
Technical data
Type of gas
Adjusted for natural gas: 1,0 kPa
(test point pressure)
Q = Nominal gas consumption NG:
Small burner x 1=
3,8 MJ/h
Medium sized burner x 2= 6,8 MJ/h
Large sized burner x 1= 9,0 MJ/h
Total=
26,4 MJ/h
AUS/NZL:
Convertible to universal LPG (Propane):
2,75 kPa (test point pressure)
Q = Nominal gas consumption universal
LPG:
Small burner x 1=
3,8 MJ/h
Medium sized burner x 2= 6,8 MJ/h
Large sized burner x 1= 9,0 MJ/h
Total=
26,4 MJ/h
Hob is approved in accordance with
AS4551 (AG101) Australian Standard
Domestic Gas Cooking Appliances.
Electrical supply 230/240 V 50 Hz AC,
0,1A max
Ignition=
240 V / 0,6 VA generator
FSD
The unit features fully-secured gas taps
(thermo-fuse).
