22
Controls - Non-Dispenser Models
IQ-Touch
TM
Setting cooling temperatures
Press the + or – indicator to adjust the temperature to the
desired setting.
The temperature setting will begin to blink with the first
touch. The display will time out after 10 seconds and return
to the basic display.
IMPORTANT
Pressing the system on/off icon does not turn off power to your
refrigerator. You must unplug the power cord from the wall outlet.
A red indicator light will be illuminated above most active features.
Touch the icon to activate the options below.
fast freeze
Activates a faster rate for freezing food.
fast ice
Temporarily increases cooling for freezer to
increase the production of ice
water filter
Press and hold for three seconds to reset
after filter change.
air filter
Filter condition status is always displayed
when door is open. Press and hold for
three seconds to reset after filter change.
temp mode
Touch to toggle display from Fahrenheit to
Celsius.
mute
sounds
Tones emitted by each key press can be
turned off based on user preference. The
sounds are muted when the red indicator is
lit. Warning signals will stay active.
default
settings
Resets all refrigerator settings such as
temp, temp display and tones to their
factory default settings.
on off
Press and hold for three seconds to turn off
the cooling system to clean the refrigerator.
It also turns off the ice maker. The digital
displays will read OFF.
vacation
mode
Conserves energy by increasing the time
between automatic defrost. This feature is
automatically activated during long periods
between door openings. Vacation mode is
manually activated when the red indicator is lit.
water
filter
default
settings
press & hold
good
order
replace
good
order
replace
hold to reset
air
filter
door ajar
high temp
power fail
hold to reset
on
off
refrigerator temp
freezer temp
temp
mode
NOTE
The recommended settings for a product installed in a
kitchen is 37˚F for the fresh food compartment and 0˚F for
the freezer.