15
Controls
IQ-Touch
TM
An indicator light will be illuminated above most active features.
Touch the icon to activate the options below.
Setting cooling temperatures
Press the + or – indicator to adjust the temperature to the desired setting.
The temperature display will begin to blink with the first touch. The display will time
out after 10 seconds and return to the basic display.
Alarms
IMPORTANT
Pressing the
system on/off icon does not turn off power to your refrigerator. You
must unplug the power cord from the wall outlet.
Door Ajar
If the door has been left open for an extended period of time, an alarm will sound
and the door ajar indicator will display on the bottom display of the control panel.
The alarm is turned off by closing the door. The mute sounds key will blink to
prompt the reset of any active alarms. Press this key to reset any system alarms.
High Temp
In the event of a high temperature condition, the temperature display will blink and
display
HI
. After 20 minutes, the alarm will sound and the
high temp
indicator will
be red on the bottom of the control panel. The
mute sounds
icon will illuminate
until pressed, acknowledging the alarm, at which time the highest temperature
reached will be displayed and the refrigerator will resume normal operation. In
case the high temp alarm is not acknowledged at the first alarm sound time out,
when the door is first opened, the alarm sound will be repeated.
Power Fail
In the event of a power failure, the
power fail
alert will be displayed and the
temperature display will blink until the
mute sounds
icon is pressed, acknowledg-
ing the alarm. Other modes may be turned off until the alarm is acknowledged. The
power fail
alert is turned off and the refrigerator will resume normal operation.
The
high temp alarm may also be illuminated until a safe operating range tempera-
ture has been reached
.
NOTE
*
Features may vary according to model.
fast freeze
Activates a faster rate for freezing food.
fast ice
Increases the production of ice
water filter
Press and hold for three (3) seconds to reset after filter change.
air filter
Filter condition status is always displayed when door is open. Press and hold for
three (3) seconds to reset after filter change.
temp mode
Touch to toggle display from Fahrenheit to Celsius.
mute sounds
Tones emitted by each key press can be turned off based on user preference. The
sounds are muted when the red indicator is lit. Warning signals will stay active.
default settings
Resets all refrigerator settings such as temp, temp display and tones to their fac-
tory default settings.
on off
Press and hold for three (3) seconds to turn off the cooling system to clean the
refrigerator. It also turns off the ice maker. The temperature displays will read OFF.
eco friendly
Keep this switch set on eco friendly (light on) for lowest energy usage. If moisture
appears on the cabinet between the doors, pressing this button will turn the light
off and enable an electric heater used to reduce moisture on the cabinet between
the doors.
*vacation mode
Conserves energy by increasing the time between automatic defrost. This feature
is automatically activated during long periods between door openings. Vacation
mode is manually activated when the red indicator is lit.