background image

16

Controls

Wave-Touch

TM

 

(select models)

Your refrigerator is equipped with a Wave-Touch

TM

 

control panel display. It is only necessary to gently 

touch the glass. There are three (3) levels of display.

1

st

 Level: Sleep Mode 

Sleep Mode displays only the 

WATER

CUBES

 and 

CRUSHED

 options. Touch an icon to activate the 

desired dispenser mode. The active dispenser mode is 

more brightly illuminated.

2

nd

 Level: Awakened Display Mode 

The control panel is awakened by touching anywhere 

on the glass where there is an indicator. Black space 

will not awaken the display. After 10 seconds of 

inactivity, the control panel will return to the Sleep mode.
The following dispenser options are illuminated:

ice off

 

Press and hold for three (3) seconds to turn the ice 

maker 

ON

 or 

OFF

. The ice maker is 

OFF

 when the 

LED above the 

Ice Off

 icon is illuminated. If there is 

no indicator, then the ice maker is 

ON

. Turning the 

ice maker 

OFF

 disables the ice dispensing feature. 

Neither 

CUBES

 nor 

CRUSHED

 will operate with the 

ice maker 

OFF

.

fast freeze

 

Activates a faster rate for freezing food and 

increased ice production.

3

rd

 Level: User Variable Options

Touching the 

options

 icon displays the following options:

vacation mode

 

Conserves energy by increasing the time 

between automatic defrost. This feature is auto-

matically activated during long periods between 

door openings. Vacation mode is manually 

activated when the indicator is lit.

water filter

 

Touch to display filter condition status. Press 

and hold for three (3) seconds to reset after filter 

change.

air filter

  

Touch to display filter status. Press and hold for 

three (3) seconds to reset after filter change.

temp display

  

When active, it allows the display of the freezer 

and fridge temps during Sleep Mode. The tem-

perature is displayed when the indicator is lit.

temp mode

 

Touch to toggle display from Fahrenheit to 

Celsius.

mute sounds

  

Tones emitted by each keypress can be turned 

off based on user preference. The sounds are 

muted when the indicator is lit. Warning signals 

will stay active.

factory default

 

Resets all refrigerator settings such as temp, 

temp display, and alarm tones to their factory 

default settings.

on off

 

Press and hold for three (3) seconds to turn 

off the cooling system to clean the refrigera-

tor. It also turns off the ice maker, all dispenser 

functions, and the Perfect Temp

TM

 drawer (select 

models). The temperature display will read 

OFF

.

IMPORTANT

Pressing the system

 on/off

 icon does not turn off 

power to your refrigerator. You must unplug the power 

cord from the wall outlet.

IMPORTANT

When the ice maker is turned off, the ice in the bucket 

should be transferred to the freezer or discarded to 

prevent it from melting.

(Fresh Food 

Ice Maker)

NOTE

Refer to 

Automatic Ice Maker-Freezer

 section for 

freezer ice maker controls.

dispenser light

 

On / Off

control lock

 

Press and hold for three (3) seconds to activate 

and deactivate. This restricts undesired changes 

to the refrigerator’s settings and prevents use of 

the ice and water dispenser.

Summary of Contents for EI23BC65KS








































Reviews: