19
Storage Features
CAUTION
To avoid injury from breakage, handle
tempered glass shelves carefully.
NOTE
Features may vary according to model.
Shelf features
To change the position of a shelf:
1
Remove all items from shelf, then separate
shelf from hanger by lifting the front of the
glass and pulling directly towards you.
2
Detach clip from the back of hanger by
pushing down on the top of the clip and
pulling the clip towards you.
3
Lift the front of the glass shelf to a 45-degree
angle and slide the glass shelf toward you.
4
Lift the hanger directly upwards and then
towards you to remove it from the ladder.
5
Place top hooks of the hanger into the
desired slot, and lower straight down until
lower hooks rest on the ladder.
6
Reinsert clips by positioning prongs on either
side of the hanger hook and pushing down
on the top of the clip until it fits into the slot.
8
Gently set the shelf onto the hanger once the
back is secured by the hanger.
CAUTION
Shelves must be removed prior to moving the
refrigerator.
7
Reinsert the glass shelf by pushing it into the
hanger bracket at a 45-degree angle.
9 You are now ready to set items on the shelf
Summary of Contents for EI23CS35KB
Page 14: ...14 Controls Wave TouchTM IQ TouchTM ...
Page 44: ......