22
Opening Perfect Temp Drawer
Setting Perfect Temp Drawer
Temperature
Storage Features
Perfect Temp Drawer (some models)
The Perfect Temp Drawer (PTD) was designed to keep food items at a precise temperature that is cooler,
the same, or warmer than the fresh food side of the refrigerator.
The PTD is shipped turned OFF. When first turned on or after a power outage the PTD may show “HI°F”
if it is set to a temperature before the freezer and fresh food temperatures have stabilized. To avoid this
message, leave the PTD in the “OFF” setting until the freezer and fresh food compartment temperatures
have stabilized.
To operate:
1
Turn the drawer on by pressing the
On/Off
button. The numeric
display will show a temperature like “
32°F
” when on and “
OFF
”
when off.
2
Select if Fahrenheit “
F
” or Celsius “
C
” temperature display is
desired by pressing the
F/C
button.
3
Press either the up
∧
or down
∨
scroll buttons to illuminate the
desired item.
4
The drawer will begin controlling to the temperature shown for
the item selected.
5
One of the three favorite selections can be chosen by
illuminating it. The temperature can then be adjusted up by
pressing the + button or down by pressing the – button. The
drawer will store the selected temperature setting until it is
changed. Three favorite settings can be chosen and stored in
this way.
6
A custom temp between 28°F and 42°F can be set by pressing
the - or + buttons while in one of the nine preset positions. The
“custom temp” indicator will illuminate in this mode.
7
The control buttons can be locked to prevent accidental changes
by pressing the
control lock
button for three seconds. When
in this mode, the display will show “LOC” when any button is
pressed. Deactivate by pressing the
control lock
button again
for three seconds. The display will then show “ULC” when the
buttons are unlocked.
Turning Perfect Temp Drawer
ON/OFF
Summary of Contents for EI23CS35KB
Page 14: ...14 Controls Wave TouchTM IQ TouchTM ...
Page 44: ......