background image

16 Maintenance

Removing and installing the 

grille:

Open the drawer, squeeze the grille (top 

and bottom) which will release the tabs on 

the grille and pull it toward you to remove 

from the cabinet. Reverse the procedure 

for installing the grille.

Service data sheet location:

The service data sheet is included in a 

clear pouch taped to the back of the 

cabinet.

If Service is Required:

•  If the product is within the first year 

warranty period please contact your 

dealer or call Electrolux Customer 

Service at 877.435.3287 for 

directions on how to obtain warranty 

coverage in your area.

•  If the product is outside the first 

year warranty period, Electrolux 

Customer Service can provide 

recommendations of service centers 

in your area.

•  In all correspondence regarding 

service, be sure to give the model 

number, serial number, and proof of 

purchase.

•  Try to have information or description 

of nature of the problem, how long 

the appliance has been running, the 

room temperature, and any additional 

information that may be helpful in 

quickly solving the problem.

Squeeze 

grille and

remove

Remove

Toe Grille

Summary of Contents for EI24RD10QS



















Reviews: