20
Setting your Preferences
Setting the clock - Time of day
Setting the clock - On or Off
The clock may be set for 12 or 24 hour time of
day operation (see advanced settings section).
The clock has been preset at the factory for the 12
hour operation. When the range is first plugged in,
or when the power supply to the range has been
interrupted, the display will show “
ClO 12:00
”. The
clock must be set before the oven can be used.
When power to the unit has been interrupted,
“
12:00
” appears and flashes in the display. To set
the Clock in this case, skip step 1 in the example
below and follow steps 2 and 3.
To set the clock (example for 1:30)
1. Press
USER PREF
until you get to the
ClO
12:00
menu page.
2. Press
1 3 0
pads to set the time of day to 1:30.
The pads
HI
or
lO
can also be pressed to
raise or lower the actual time displayed.
3. Press
START
to accept the changes and go
back to user preferences menu display.
4. Press
CANCEl
when finished to get back to
the standard oven display.
The oven control can be programmed to display
the time of day or not. The oven has been preset at
the factory to display the time of day.
Changing clock display between ON and OFF
1. Press
USER PREF
until you get to the
ClO on
menu page.
2. Press
lO
or
HI
to toggle between displaying or
hiding the clock.
3. Press
START
to accept the changes and go
back to user preferences menu display.
4. Press
CANCEl
when finished to get back to
the standard oven display.
Setting time of day display -
12 or 24 hours
Setting temperature display -
Fahrenheit or Celsius
The oven control can be programmed to display
time of day in 12 hours or 24 hours mode. The
oven has been preset at the factory to display in 12
hours mode.
Changing between 12 or 24 hour time of day
display
1. Press
USER PREF
until you get to the
ClO
12hr
menu page.
2 Press
lO
or
HI
to toggle the display of the
clock in 12 or 24 hours.
3. Press
START
to accept the changes and go
back to user preferences menu display.
4. Press
CANCEl
when finished to get back to
the standard oven display.
5. Remember to set your clock after changing the
time of day display mode.
The oven control can be programmed to display
temperatures in Fahrenheit or Celsius. The
oven has been preset at the factory to display in
Fahrenheit.
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. Press
USER PREF
until you get to the
F-C F
menu page.
2. Press
lO
or
HI
to toggle between the
°C
and
°F
display options.
3. Press
START
to accept the changes and go
back to user preferences menu display.
4. Press
CANCEl
when finished to get back to
the standard oven display.
Summary of Contents for EI27EW45JS
Page 1: ...318 205 135 1001 Rev A Use Care Guide Built In Wall Oven 318205135 Rev B 1105 ...
Page 30: ...30 Notes ...
Page 32: ......
